The best metal detector is the one that suits you and your hobby. Before deciding which metal detector to buy, determine what type of metal hunt you intend to conduct as well as find out as more about the company’s goods, you are willing to buy as possible.

White’s Electronics, a family-owned manufacturing company, produces the best metal detectors for hobbies, security, and industrial needs. Using the latest research and technology has made this company a leader in the field of metal detection. American Whites metal detectors delight customers for almost 70 years. Today you can also afford such a purchase with our online store.

Top 5 Whites Detectors

White’s Coinmaster Metal Detector

 White's Coinmaster Metal Detector

Coinmaster metal detector is a model of metal detectors from White’s, which replaced Prizm in 2010. North American market leader. It combines ease of management and a sufficient depth of detection of metal objects for devices of its level. White’s Coinmaster metal detector is equipped with a convenient display that displays the depth of the object, the type of metal, power level, and additional options, as well as settings:

  • SENS – adjustment of sensitivity to metal objects and interference. The greater the value of sensitivity, the deeper you can find a useful object, but the influence of soil and electromagnetic pulses also increases.
  • P / P – the inclusion of an accurate positioning mode Discrimination does not work in this mode.
  • DISC – provides ignoring unwanted targets. You can sequentially disable the response from 5 different types of objects. In total, the display shows eight types.


  • Easy to use.
  • Automatic ground balancing.


  • Manual is too complicated

White’s Surfmaster DF Water Metal Detector

 White's Surfmaster DF Water Metal Detector

The Whites metal detector was conceived and created as a universal beachman for working in salt and freshwater. It works both on land, on simple and complex soils, and underwater at depths of up to 30 meters.

The White metal detector is built on pulse-pulse technology and is designed to search for coins and jewelry.

In the past, to achieve maximum search depth, pulse-pulse White’s metal detectors had to be moved slowly over the ground. This gave good results for some purposes, but sharply reduced the sensitivity of the detector to gold and copper-nickel coins. In addition, they had manual tuning. Due to the frequency drift, we had to tune the device all the time. Most, like voice acting, have a proportional signal – a “siren” that changes the frequency and volume depending on the strength of the signal.

Surfmaster PI Dual Field is different. As a result of 15 years of research into metal detection and the creation of White metal detectors, this device provides fast wiring without loss of sensitivity to all targets, excellent stability and ease of use, the same as conventional VLF plug-and-seek discharge detectors at all soil types, including salt sand and complex mineralized soil.

With Surfmaster PI Dual Field, you can move the coil quickly or slowly – without loss of sensitivity. This White’s metal detector is specially designed and has better sensitivity to gold and copper-nickel alloys than to all other metals.


  • Comfortable handling pole.
  • Good search depth.


  • A little pricey


 White’s SPECTRA VX3

The Spectra VX3 White’s multifunctional metal detector will become a reliable assistant in finding treasures, lost jewelry, or ancient relics. This is the lite version of the Whites Spectra v3.

Like its predecessor, Spectra VX3 operates at three frequencies: 22.5 kHz, 7.5 kHz, and 2.5 kHz and can work both at all frequencies simultaneously and individually.

The metal detector has not changed its appearance – the same case and display as its predecessor. The menu has eight built-in search programs that can be changed by the user; the least used ones have been removed. Among the built-in settings, you will find the well-known PinPoint as well as a host of other graphic settings for the information displayed on display.

The device is equipped with a multi-tone sound indication for notification of target detection and has an external speaker, as well as the ability to connect headphones, both wired and wireless.

The device is powered by 8 AA batteries, operating time on one set of batteries from 8 to 10 hours.


  • Two-tone detection range.
  • Ability to adjust the length of the bar


  • A bit bulky despite being light.

Whites MX Sport Waterproof Detector

 Whites MX Sport Waterproof Detector

The Whites MX Sport metal detector can work both on land and underwater at a depth of up to 3 meters, has a high search frequency, an elliptical DD coil in the kit, a color display and despite its small weight of 1.8 kg MX Sport should be well balanced due to batteries located in the armrest. In general, if the manufacturer does not go too far with the price, then it will be a direct competitor to AT Pro and AT Gold.

So if you are planning to acquire an amphibian metal detector from Whites metal detector dealers, it is definitely worth paying attention to the Whites MX Sport as the metal detector is very interesting.


  • Easy to use.
  • Automatic ground balancing.


  • Analog readout.

White’s TRX Bullseye Pin-Pointer

 White's TRX Bullseye Pin-Pointer

The depth of the Whites TRX is mind-blowing. It features a great body, power only 2 AA.

On one side of the Whites pinpointer, a ruler is applied to the case, such as to measure the depth of the pit. Not that a mega plus, but a trifle useful.

As we enthusiastically told diggers that powering the pinpointer with finger batteries is cool. AA batteries intersect with the energy reserve of most modern metal detectors. You do not need to carry along four spare AAs for MD and Krona for a pin. Again, two fingers cheaper than Krona.

The battery compartment of the Whites TRX inside got me the impression that everything was done under Kron too. On the battery cartridge, the contacts repeat Krona.

The cover is top notch! Not sliding, with a sealant and most importantly, orange. On the search, when everything is dusty, the ground is dark, colored beacons help to focus vision. Looking around the place of the newly dug hole, it is easy to look for a pin with a look. Again you will not step on it.


  • Waterproof.
  • Comfortable handling pole.


  • LCD is hard to be seen in a sunny weather.

Brand Guide

Where Can I Buy a Whites Metal Detector?

You can cheaply buy Whites detectors via White metal detector dealers website or directly from Amazon.

In the USA, the goods are dispatched both on a prepayment basis and in cash on delivery.

Where Can I Repair a Whites Metal Detector?

Repair of metal detectors and search coils of any complexity can be done by contacting the Whites service center, which will quickly and efficiently provide any service to restore the working functions of search equipment.

Any equipment is not insured against breakdowns, and sooner or later, one has to turn to specialists to solve the problems that have arisen. Whites helps owners of metal detectors of any brand bring their devices to life, which for some reason are out of order or have ceased to do their job properly.

Experts carry out diagnostics and repairs of any models of metal detectors and search coils of both world and domestic manufacturers. In each case, the approach is individual, and the conditions, terms, and payment for repairs are agreed separately, taking into account the complexity of the work and the wishes of the owner. If the defective metal detector or coil is subject to warranty repair, then in the case of the current period, you can repair the device in the service center in accordance with the warranty conditions.

Before contacting Whites service center, check the condition of the batteries, their serviceability and charge level, and replace them if necessary. Also, a common cause of unstable operation of the metal detector may be water entering the device, which can be corrected by simple drying. If the detector still does not work correctly, reset the settings to the factory parameters, according to the instructions for the device.

If you are convinced that the problem is something else, then clean the device from contamination, pack it, prepare a warranty card, and contact Whites service center to find out the cause of the breakdown.

Where Can I Buy Parts for Whites Metal Detector?

Apart from detectors, online stores provide and official Whites website provide you an ability to purchase Whites metal detector parts:

  • Chargers (mains, car, backup) and charger adapters.
  • Rechargeable batteries, battery boxes, cable for the battery, covers for the battery compartment.
  • Wireless coil control unit and control unitholders.
  • Accessories and spare parts for metal detectors: keyboard, speakers, headphones, extension cable, search probe with cable, protective transport case for metal detectors, fastener sets, fasteners, armrests, armrest covers, armrest belts, armrest bars, armrest brackets, panels , board, supports, search loops, triggers, designators, gaskets (washers) for mounting coils, rods (upper, middle, lower).
  • LCD displays, characterized by the latest, highly customizable microprocessor technologies, providing comprehensive signal analysis, fast response, easy data perception.
  • Covers on the control unit and for coils.
  • Backpacks, bags, unloading vest.

Whites vs Garrett

Whites Coinmaster and Garrett ACE 250 are equally lightweight metal detectors and have a standard design for ground metal detectors – three rods, the top location of the monoblock.

Monoblock in the metal detector (when the screen, control, power and headphone jack are placed in one block) makes it possible to conduct a search without using rods – a rare type of search, but it will not be amiss in stock.

The Whites Coinmaster screen is the same informative as the ACE 250. The graphic scale of the metal discriminator in the ACE 250 is a 12-segment scale, and in the Whites Coinmaster is 8.

The sensitivity of the metal detector is set to 8 segments in the Whites Coinmaster and ACE 250. The depth indicator to the target – in Whites Coinmaster is 5 segments, with a gradation from 0 to 8+ inches.

The ACE 250 has a 4 segment depth gauge and a range of 2 to 8+ inches. In both the Whites Coinmaster and the ACE 250, the depth scale is graduated for purposes commensurate with the size of the coins. Displays the status of the discriminator of metals, batteries.

In our opinion, the Whites Coinmaster, in comparison with the ACE 250, has the weakest point – the type of metal detector power batteries. The Whites Coinmaster is powered by 2 Krones, and the ACE 250 has four AA batteries (fingers). Krones for Whites Coinmaster, harder to buy, are more expensive.

But if you use batteries (which is most often used with active searches), this minus of Whites Coinmaster is removed.

Whites Pros and Cons


  • The Whites Coinmaster really has the same finding performance that can shake the merits of the ACE 250.
  • Inexpensive and easy to find metal detector.


  • Krones for Whites Coinmaster are harder to buy. They are more expensive.

Garrett Pros and Cons


  • Simplicity is the same as that of a competitor – turned on, chose discrimination, sensitivity, and go for searching.


  • When the charge went down in the ACE 250, phantoms appeared, although the indicator showed one more division.

Whites vs Fisher

Let’s try to figure out which depth detector is better: Fisher Gemini-3 or White’s TM 808.

Firstly, we will evaluate the design features of both metal detectors.

The weight of both metal detectors is approximately the same: TM 808 – 2.12 kg, Gemini III – 2.8 kg. The difference of 700g does not really affect the duration of the search, but the design of both metal detectors differs very seriously!

According to this criterion, the leader is Fisher Gemini-3: the receiver and transmitter are connected to each other by a three-section boom. And with the help of latches, the receiver and the transmitter are assembled in a “suitcase” convenient for transportation, which can be carried both with the help of an invoice handle on one of the blocks or in a special bag.

The disadvantages of the Whites TM 808 depth detector include a fixed handle and non-separable frames of the receiver and transmitter – they can only be disconnected from the unit.

And what about the strength of metal detectors?

Again, the leader in strength is the Fisher Gemini-3. The rigid “frame-transmitter” connection and the massive body of the detector and transmitter of the metal detector make it more reliable in operation, especially in the forest, in tall grass, etc., compared to Whites TM 808, which, over time, has frames, especially the front one, they break loose in the rods, and the slightest change in their relative position relative to each other leads to a false response.

Secondly, we compare the maximum detection depth of metal detectors.

The declared depths for both metal detectors are 6 m. This figure was obtained as a result of laboratory studies under ideal conditions. However, as practice shows, in real conditions, this figure drops to 4m. Metal detectors stably detect medium-sized objects, for example, a metal helmet, to a depth of 1.5m.

Thirdly, the simplicity of instrument settings.

The detector’s settings are described in sufficient detail in the instructions. However, there are some points worth noting.

If we compare the instruments for convenience and comfort in the search, then the TM 808 is the leader. It can be used to search quite confidently both on flat terrain (fields) and on terrain with differences in ground levels (arable land, trenches, dugouts, trenches, etc. .) and in the forests. True, over time, the TM 808 begins to “please” us with false positives. The reason, as described above, is the insufficiently reliable “bar-frame” joint.

Gemini-3 is suitable either for searching on plowed fields or in clear pine forests. The reason is the inconvenient handle in the form of a belt. The device now and then will navigate to swing on a belt, and even professionals can keep the distance of search elements to the ground unchanged. All this leads to a lot of false positives among novice searchers.

In general, both devices are quite simple in settings; they work very stably, which is important for beginners, and, in general, demonstrate the same results.

The choice is a matter of absolute. If you want to achieve maximum detection depth, Fisher Gemini-3 is ideal, it will be easier to configure, and the TM 808 is more stable.

Whites Pros and Cons


  • Can be used to search quite confidently both on flat terrain (fields) and on terrain with differences in ground levels


  • The detector includes a fixed handle and non-separable frames of the receiver and transmitter

Fisher Pros and Cons


  • The receiver and transmitter are connected to each other by a three-section boom
  • The massive body of the detector and transmitter of the metal detector make it more reliable in operation.


  • The inconvenient handle in the form of a belt

Whites vs Bounty Hunter

Both metal detectors (White’s Treasure and Quick Draw Pro) belong to the class of inexpensive ground-based metal detectors. Both initially have a round 8-inch coil in the configuration (a large 11 DD coil is a separate 11 DD configuration).

Metal detectors have a digital output of target identifier (VDI), multi-tone sound response and new technology for discrimination of metals in finds. VDI values ​​in discrimination have a classic correspondence, 1-39 ferrous iron, 40-99 finds containing non-ferrous metal.

The advantages of Treasure, light and reliable in search, a very simple menu and practical experience are not required for mastering the detector. They work on the principle of “plugged in and went looking.”

Whites Pros and Cons


  • Simple in operating
  • Solid design


  • Smaller coil in the latest variations

Bounty Hunter Pros and Cons


  • Ergonomic casing
  • Clear sound of metal detecting


  • Too complicated manual